Tolarances thankfully are +/- .020 and I've got to make three. I'm afraid after I face the flat part I can't take it out of the vise or it'll be a pain to get it lieing flat again, I could use a level but idk. I'm thinking set my vise on a swivel angle plate, vise down on the two ends of the bar, then face down a large enough portion, angle it one way to get the side chamfer, unclamp the vise, turn it 180 then to the other chamfer. From there idk, I think I'll make this in Wax once or twice to get it right I'm just hoping someone has some magically easy answer.
__________________
-JWB
--We Ain't Building Pianos (TCNJ Baja 2008) |