Greig,
Look at the post...In the Canned Cycles section, pulldown the cycle list and select the tapping cycle. There is a macro line for the tapping cycle. You will probably see part of the macro with something like this..."E";NC_FEED$
The semi colon in BASIC joins the 2 strings together. NC_FEED$ is already a formatted word with an "F" as its prefix...You can simply delete the "E";
Then save your post and regenerate the macro file.
There will be an exciting new product announcement coming this month...stay tuned!
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
|