11-07-2008, 01:21 PM
|
| | | Join Date: Dec 2004 Location: usa
Posts: 1,665
| |
Originally Posted by THend  Thanks!
The bit advertised as 3/16 which should be .1875, but after measuring it a few times, it is actually .1750
Made the adjustment in the tool definition, re-ran the CAM, re-ran the code, and all is well!
Mental note, always measure the tool... |
Sweet. 
I am glad it worked out.
Mike
__________________
Warning: DIY CNC may cause extreme hair loss due to you pulling your hair out. |