This thread will document the successful installation of HP UHU into service.
For me it has been a tremendous success though a bit late bcos of the learning curve.
Here is what I conclude :
1. have the right encoder cable (multistrand twisted pair shielded)
2. Have the right Powersupply (consider 10% + when deciding the voltage)
3. Use a resistor in series when using high rated power supplies for startup which get bypassed after a few seconds.
4. Get Big heat sinks and force cool them if necessary - or you will get drives faulting all the time.
5. Have a lot of patience
IT SURE DOES WORK!
rgds
Irfan |