Originally Posted by ckirchen  Do not use a Dremel. This past weekend, I built a CAT40 Dremel holder and I have since scrapped it because the runout was brutal. The armature is very true, but the collets are crap. The best I could get it to run at was .006" TIR and that was a fluke. Every time I tightened the collet, the runout was different. The average was about .012" TIR. I tired different collets and even Dremel's drill chucks, but I got the same results. |
Are the rotozips better? I just bought today this one.
http://cgi.ebay.com/ws/eBayISAPI.dll...m=380077183055
Yoram