I am taking a class at a local college and a Boss 5 is being revived. The card in it that talks 20Ma current loop has a connector that needs to be moved to get RS232 to operate. It was in the docs that were available. I can get them copied but class is not until Tuesday. We did not succeed due to lack of an operating manual.
I will check before I go to see if you still need the info. I think there was a wiring diagram for the cable as well. We did not get it working as the class was canceled. We still have a manual machine class going.
Oh yes the college is Delgado in New Orleans.
c_nut |