Originally Posted by robashley  Hello Aspire....
I have recently finished a scaled up rockcliffe, but I modified it. I used samic linear bearings instead of oilites (easier to fit and align) although slightly more expensive.
Motors are NEMA 23s ~ 200 ozin. I am now about halfway through reading the MACH 3 instruction manual...
Hope the build goes well
Rob |
What! "reading a manual" call yourself a man...Pah you'll be asking directions next!
I'll get me coat.......
@ Wongster, to scale down is reduce the size of all components....although you may not want a 3mm leadscrew if you're "really scaling down"