[Shadowfaxx]

I have been trying to edit the mpfan.pst file in MC9 to come up with something that works for a Prototrak DPM-V3 as the machine manufacturer suggests. It works but has several errors, the most annoying of which is that it calls up the tool that is already in the spindle and the prototrak runs up to the toolchange position after each call. This requires editing, a lot of repetitious editing.

Has anyone had any success with this or has any other advice to offer?

The mx2 and mx3 posts do not make 3D calls, so they are useless to me.

Thanks for your help folks,