Kmed
Unable to run your code, couldn't to enter g1/2/3
I have run my piece of code and able to Jog with the Handwheel in the X direction and can also jog (XYZ) from the controller.
I'ts the Y and Z with the HANDWHEEL that is the problem only.
To position the cutter perpendicular to the incline plane I have a Swivel-Head which I have made. It can be rotated 360deg (Z axis (C)) and swivel 180deg (X axis (A) or Y axis (B)) which I position manually.
Thank you for your help.
Kiwi
NZ |