Well I could really use some help here. We purchased this machine brand new about 2 months ago and have a serious issue already. I would like to know if anyone else who owns this machine or the 400 is going through the same crazy stuff too. The table keeps getting stuck either in unclamp mode or doesn't rotate all the way and then the machine alarms out. It's been happening about every 2 days. The tech comes out and messes with the parameters and it's fixed temporarily. My understanding is that it should never have this problem unless there is a power outage during table rotation. I think part of the problem with our distributer is that they haven't sold many of these so they don't know them inside and out like we expect them to.
Any help/advice would be great. Thanks fellas |