ok, this is very interesting to me, I am sure the solution is going to be easy, I just dont know what it is.......
I did a small program. basically a square rastered toolpath from left to right small Y movments down the model. Here is what is interesting. As Y would move thru the model Z put a wave on the surface. imagine this a box. and as you fro from the front of the box to the rear. the surface height is a symmetrical wave. Sure wish my girl would get home with my camera. Pics are alot better then words.
The wave starts at the front of the model. As the program progresses thru the model the z height gradually goes down, then back up to peak then back down then back up.
Im sure its a setting.
BTW, this thread was intended to possibly help others who might develop the same issues that I am having to face. No judgment or ill feelings are meant to anybody, company or product. |