Al -
Thanks. I should have said all of the outputs work fine. It is only the inputs I am having trouble with.
Camsoft -
Here is a snip of my Logfile:
>#69=1
(INPUTIO.FIL)
16:54:30
(INPUTIO.FIL)
16:54:33
(INPUTIO.FIL)
16:54:35
(INPUTIO.FIL)
16:54:38
(INPUTIO.FIL)
16:54:41
>#68=0
(INPUTIO.FIL)
16:54:44
>#68=1
(INPUTIO.FIL)
16:54:47
(INPUTIO.FIL)
16:54:49
>#67=1
>#68=0
(INPUTIO.FIL)
16:54:52
(INPUTIO.FIL)
16:54:55
(INPUTIO.FIL)
16:54:58
>#66=1
(INPUTIO.FIL)
16:55:00
>#66=0
(INPUTIO.FIL)
16:55:03
>#66=1
(INPUTIO.FIL)
16:55:06
>#66=0
(INPUTIO.FIL)
(INPUTIO.FIL)
16:55:08
(INPUTIO.FIL)
16:55:09
>#66=1
(INPUTIO.FIL)
It is easy for me to actuate any one of the limit switches on the toolchanger and still see the screen. The INPUTIO entries occur each time I either close or open a limit switch, but as you can see, only a few have a #66=0 or similar entry. I have also tried several different switches to make sure it was not an isolated channel.
My version number is 14.2. |