Hey all,
got a weird problem, my r2e3 keeps giving me an error when i turn it on/enable axis. The screen just says "jog x, axis limit". Here's some background, a student slammed the quill into z home. the limit switch cracked and i replaced it with oem part. seems to be ok, however the machine doesnt want to let me enable the axis to begin working. i've checked the table limits, the x-axis is close to the limit but not touching. the y-axis is dead smack in the middle. i have manually moved the quill down by rotating the head pulley ( it was jammed previously ).
Basically, table + head limits seem clear, switches are functional(tested with dmm) and wired properly.
Can anyone help out or throw out some ideas as to what this may be?
Please pm, email or post. i would like to get this beast up and running.
Thanks. |