Originally Posted by djmickyg  I'm having the same problem as this.. everything seems correct as the diagrams show.. the motors are getting power when i turn it all on as they lock and i cant turn them, but the estop isn't working and the motor's ain't turning..
i will have to try the Sherline ½ Pulse mode thingy..
I've been trying with EMC2 and mach3
EDIT: Figured it out.. my parallel cabel was no good. the pins were all crossed over.. got a new one and now it works! |
Uhm, so your first cable was not Bi-Directional?
I think I may have the same problem... I'll get a new PP cable and try...