Originally Posted by mte.jalal  Hi,
You are able to send the Gcodes to machine with CAM softwares like Surfcam, Catia, Powershape,... or you write the gecode in Notepad then transfer them to machine with pcin , winnc , surfcam dnc, ... .
To give the zero point you have to push prog bottom then push menu bottom then push number that's about reference point. |
Hi,
I send the G-codes to the machine with Mastercam and it works, but I don’t now how to run the program in automatic position.
Then I’m in automatic or single position I can’t see any program.