G'day Rob
I am not familiar with the rockcliffe but believe it is a small MDF machine.
Let's be realistic, many homebuilt routers operate fine without limit switches.
Ask yourself what will happen if an axis reaches the end of travel and the motor tries to keep going.
If it will cause damage then limits would be advisable.
If no harm is done then get going using your machine and decide later whether or not you would like to add limits for convenience.
I know of many homebuilt users that have hundreds of cutting hours on machines that will never have limit switches.
You will get many on the forum who will cry that limits are essential. Sure on some machines they are but horses for courses.
Greg |