If you look at the thread for InventIt 's router, he uses these motors and can get over 300ipm with 1/2-10 5 start acme screws. If I ever finish my first router, I plan on using those motors for my next one.
Here's the link to InventIt's thread: http://www.cnczone.com/forums/showthread.php?t=2249
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |