Hi folks,
I just released a GPL 3D CNC Toolpath Generation program.
You can see some screenshots of it in action at:
http://sourceforge.net/project/scree...roup_id=237831
You can download it from:
http://sourceforge.net/project/showf...roup_id=237831
The GUI is not very sophisticated yet... and the project website is fairly minimal,
but it should be functional...
Please let me know if you are trying it out and what you think...
I'm especially interested in hearing about someone actually using it
to create physical objects...
The first one to do so can put a picture on the project page :-)
-- lode