So I mucked with it more today. I loaded a program straight from the programming manual:
%N1GOG90X-2.Y-5.T1M6
N5X1.Y-1.Z0.05
N10G81X1.Z.55F80
N15X3.
N20X2.Y-2.5
E
On N5 the machine moves to the X-Y position, but when it goes to rapid, you hear the Z drive motor whine, but with no movement. The readout shows the Z moving though... Then it gets to N10 and runs fine... I ran this with and without a TLO in for T1. Same results. It almost seems like a drive transistor?? |