All, I appreciate the help with this! I still have not got the program above to work, so i tried a drilling cycle program and have the same issues :-(...
%M01
N10 G0 G90 X-10. Y-5. T1 M06
N20 X2. Y-2.
N30 Z0.25
N60 G81 X2. Y-2. Z-0.1875 R.1 Q0. F20
The M01 in the beginning is in there or when I use TeraTerm to send the program to the machine, the program does nor send correctly without it..??
So with this one in "Auto" it still skips the Z0.25 and jumps to N60 and starts running it.. So any other ides on why it would skip the rapid move??
I appreciate any help on this.... |