[trainfred]

Hi:

I seem to be getting it all mixed up. !. The machine I got has not work for a year. 2. It still dose not work and it develped more and more problems. 3. The programs that is supplied by themanufacturer is not the one listed in the owners manual. At leased it dose not make sence to me. Reacing the manual and it tell you were to go in the program but on the computer there is no such thing. I wanted to get a hold of Richard, because he did the commentary or it, the disk, to find out what gives. 4. I had contacted Bob Cad about the problem I was haveing with the macros and I got the disk on vers 21, not the manual, and no where dose it sayabout macro in the disks. Short of looking at the disk, all of them, I asked sonebody to help me and i spend hour and the shone and nothing. Maybe, what you said in the manual432 I will try it. Thanks. Now, who is going to fix my machine to run. That is the question. Thank for your input.