[Swami]

I am still trying to just get this going in Cutviewer, let alone my actual cutting.

Here is my simple test program. I want to remove .25mm material from the edge of this material using cutter compensation.

Compensation appears to be ignored, and the first cut winds up being .25mm + the radius of the tool.

Any help greatly appreciated!
Thanks,
Swami

----------
(TOOL/MILL,4,0,25,0)
(STOCK/BLOCK,200,25.5,6.35,0,0,0)
(FROM/-5,5,10)

(Setup)
G90 G21
G00 G90 X-5 Y5

(SmallPocket Entry Move)
G00 G42 Y0 X0 Z-1 D4

(What is supposed to be a .25mm cut)
G01 Y.25 F200
X46

M30
%