Thank you Greolt and Big S for your reply
New Info in from Excitech I received today:
"It is easy to setup the machine to run the file from the U Disk at the speeds from the Ucancam file.
Please go to
Menu--AUTO PRO SETUP--G code Read Setup--F Read, Enable.
Done.
Best Regards
Ronny”
If this works I will have to find out how to adjust the VFD for the spindle speed....I am pretty sure mine is running at max of 24,000 rpm. I am a little hesitant of messing it up, anyone got a quick answer on VFD adjustment? |