Mr Fishman, I do have to say that for you to take your time to respond to the question is above and beyond the normal. thank you for taking your time.
I am going to suggest as this is in regards to Partmaker that you might want to handle this off the Mastercam forum and on the Partmaker forum we have here on CNCZone or off line.
Sidswiss, as a Cad-cam dealer, I highly suggest you take the time to speak with Mr. Fishman.
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |