The file we get from scan data sets are in .stl format. So they generaly run from 150 to 300 meg, but the average is usually around 200. I was just wondering about the stability. We tend to see a lot of crashing duiring the toolpath processing. We got new PC's and that helps marginally. That's why we are using Artcam for these big files. I'm still learnig from reading the literature on Mastercam since we don't have it yet. Our router comes in about 2 months. So i'll ask is it feasable to think that we may be able to machine large .stl files like I mentioned in MC. |