There is a ton of literature and videos you can but for MCV9, have or can you purchase any of them?????????? http://www.techedu.com/Mastercam.asp http://www.tipsforcadcam.com/ http://www.emastercam.com/cgi-bin/ultimatebb.cgi
These are highly recommended 
__________________
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com |