Originally Posted by machintek  I need to know what control you are using to try and find the correct schematic. Usually the maintenance manual has a chart as to how each transformer is configured for a specific voltage. I suggest you look for one.
some schematics have this as well.
George |
Hi George,
i see from the a previous post that you passed the wiring diagram for the above machine.
We have recently acquired the same spec machine (Bridgeport Interact 1 MK 2, Heidenhain TNC 2500) from our sister plant. Unfortunately there was no accompanying documentation.
I would appreciate it if you could mail the wiring diagram and if accessible a user manual to me.
Thank you
Yogan