When i got the power interrupted message i am assuming the power was off somewhere but as soon as I pressed an axis key the machine went into "homing mode".
I tried that with the handwheel and I still did not get any movement on any axis.
I tried to use the joystick like that and there was no "joy", nothing moved.
I have some of the manuals, I contacted Heidenhein and they gave me the following information:
The TNC2500 is a custom made control for Bridgeport it is base off our TNC 360. The records for the machine (including the machine parameters) should be available at the Bridgeport UK (England) facility.
TNC360:
http://filebase.heidenhain.de/doku/o...26/N14826.html
TNC2500:
http://filebase.heidenhain.de/doku/o...D4/N142D4.html