Hi Bob,
Thanks for your reply. Just to give you an example of what I mean. This is what I have:
%
O5000 (FACE.TAP)
( MCV-OP ) (18-JUL-2008)
N100 (SUBROUTINES: O1 .. O0)
N102 G90 G17
N104 G80 G49 G40
N106 G54
N108 G91 G28 Z0
N110 G90
N112 M01
N114 M6 T1
(TOOL -1- MILL DIA 100.0 R0. MM )
G90 G00 G40 G54
G43 H1 D31 G0 X238.773 Y-17. Z49.5 S5000 M3
M8
(----------------)
(FACE#1 - PROFILE)
(----------------)
X238.773 Y-17. Z10.
Z2.
G1 Z-0.4 F1250
X183.773 F2000
X0.183
X-54.817
G0 Z9.5
X238.773
Z1.6
G1 Z-0.5 F1250
X183.773 F2000
X0.183
X-54.817
G0 Z10.
G91 G28 Z0.
M99
%
As soon as it gets to the positioning the block numbers disappear.
I have the GPP manual. I'll take a more in depth look. Thanks.
Matt. |