Made first cut this weekend !!!
Useable travel 30x20x8"
Router table is painted 3/4 MDF, 4x4 legs
THK KR46 slide/actuators
THK 25mm linear rails
Clifton Precision 360oz/in Servos
USDigital 250 line encoders
Homemade servo controller -
Gecko G320's on heatsinks
Axxus breakout board
35V/25A power supply
Dell 400MHz laptop running Mach2 (demo)
Bosch 3/4hp laminate trimmer
Total cost under $3000 (thanks to Ebay)
__________________
If it ain't broke... fix it 'til it is. |