Well I have two macros now one for face milling and one for side milling on a Haas mill. This mill is used in our Toolroom and we are always taking sawed stock and milling it square. When ever I write a cnc program I alway assume the stock is already milled to size and square. Becouse I never know what size of stock the toolmaker will grab. This way the toolmaker can grab any size stock they want and use the macros to quickly mill it to size and square. Then my Cad/Cam program will do the rest. I'm looking to do some macros on the Haas lathe but have found out that you cann't use macros in canned turnning cycles. |