Originally Posted by Al_The_Man The thing I need to know is what the setting are on the SET screen, it should show TV Check, ISO/EIA and port settings etc.AL |
Right got the settings required of the SET screen.
REV X = 0
REV Y = 0
TVON = 0
ISO = 1
INCH = 0
I/O = 1
ABS = 0
SEQ = 0
I went to
http://www.cadem.com/ncnet/ncnet_dncdetails.htm
and looking at the setting there it's for hardware handshaking when i compared them with
http://i-logic.com/serial/RS232.htm
Al, do you need more info or is this enough....
Thanks in Advance
Niall