Originally Posted by syil canada  After that i suggest to all of my clients not to use 64bit computers, all of my machines now run 32 bit processors. As i was told that the “Syil cnc will only do what they are told to do by the computer”. Any e stop functions are on the pin config controlled by the computer, it the computer is too busy doing different processes it can take a few seconds to register. |
I am puzzled how a machine is able to be sold with this condition to perform an unsafe E-stop as it appears to contravene the Electrical code and NFPA79 recommendations.
This is why Safety Relays are replacing normal E-stop relay practice and will probably become mandatory in N.A. also.
Al.