thanks,
dont understand why .dxf convert to .cnc by
ACE YA G-code result is not work!
but when i load original .dxf file to
DeskAM then save as "toolpaths DXF" to harddisk, load it into
Kcam4 and save as G-code file to harddisk.
at the end use
Turbocnc to read that G-code for Picocnc controller to drive Sherline mill........... it is work!
please dont Laughs me stupid for that
what is meaning "toolpaths DXF"?
what difference between "toolpaths DXF" and dxf file from CAD?
newbie question