Hu & WMS,
Simple indexing will be all that I will be doing at this time. I asked sales about the improvement on the wrap method as now being used by their Mill Pro 2000, and I believe they said that will be upgraded after they finish Lathe improvements they are now working on. Yes I believe they are moving forward much better than my previous experience has been with my other software provider. One of the questions that I will be addressing is the rotation process of the model, at the present time, I use different Z offset values (per Haas tech support advice) on all 4 sides because of non symetrical features about the centerline of the rotary C/L. That way I can make individual adjustments easily. I am trying to determine the best way to inprove on this "if possible" to establish Z zero on the 4 different sides using a model which may need to be altered slightly for different parts. |