Onsrud makes bits for plastics. http://www.onsrud.com/index.html
Vortex also has some. http://www.vortextool.com
If you want a polished edge, you'll probably have to polich it, but it is possible to get a very smooth edge. The above tooling is generally for routers, btw.
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |