[David Bord]

Originally Posted by Torchhead We have 5 axis and 5.5 axis (6 drivers & motors with one hardware slaved) units. Look at the Plazpak 5 and 6 http://www.cnczone.com/PlazmaPakPriceChart.htm The bigger the table the more mass you have to move. Big gantries need more torque. TOM CAUDLE www.cnczone.com

Tom, for some reason, I cant connect to the above URL. I see your sig now shows cnczone.com, but I cant seem to find the link to your online store with the motion control parts.

David