Originally Posted by tack1000  Hi
You have not lost it, cose mine does the same thing.
Only sometime and only on smallish holes it wil learch forwards. It's still cutting but just gives a rough finish. It learches about 2 to 3mm. The g code is just a straight three line code with no fancy arcs.
I would also be interested in this one.
I'll post the code when I get to work. Maybe vidio it too if I can get it to do it. It's almast like a tight slider or rack sticking but I don't think so.
Tack1000 |
If you could take a video or post a g-code so I could look at the problem, it might help diagnose the problem.