The HobbyCNC Pro board does NOT require a BOB!
Originally Posted by saddledance  My thought was that if I buy a board now I could start goofing off with the little motors that i have now. I found the specs for the the two motors I have one is uni the other is bi. I was thinking that If i pick up a board now test the motors and get an idea of how the software will work with everything together than later when i can afford motors buy those. I just dont want to buy the parts and later find out i need to buy another board because they wont work with the motors I'll buy later on. as far as the use all I could forsee myself using it for is wood and light metals. Hobbycnc seems to have a decent package but like I said i don't want to have to solder anything unless it is broke. |