Andrew,
Sorry I don't have a clue as to how a Mach 2 control operates or it's features.
I did notice that you have a G54 called out on line N100 for your first tool change but No work offset for your second tool change. I have no idea if that matters as for most controllers the work offset is modal. Just a thought.
As for it only affecting the X axis, it could be that is the only value that is different in the offset table of the controller. Again sorry I don't know more about your machine setup.
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |