Here's what I've got while running 1.75" deep hole drilling throught FANUC0 posptprocessor...I don't get it, but it looks like it is a 3-axis milling posprocessor...I doubt that this would be of any help, but here it is:
N5 X0 Y0 S1200 M3
N6 G43 Z.1394 H1
N7 Z.0494
N8 G95 G83 X0 Y0 Z-1.8549 R.0494 Q.25 F.002
N9 G80
N10 G0 Z.1394
Last edited by tex; 08-27-2004 at 01:56 AM.
|