That seemed to help.....kind of.
We didn't get an alarm and it ran, but after drilling to the final depth, it went to
X3.6 (there goes the drill) then Z1.850 then X.000 before going to line N0203
Here is a section of the code in the machine:
N0200G97S525M08
N0201G00X0Z1.85T0202
N0202G74Z0.415Q2500R1.8F.003
N0203G00X0Z5.25T0200
I don't know where it is picking up the X3.6 move as there isn't a X3.6 anywhere in the program. We're really confused now. |