Originally Posted by wwendorf  I got the new pulley's with my Syil America SX3. Works great with not much loss in speed and power. I'd love to get closer to 5000-6000 rpm, but 3400 works for now.
Wade |
5000-6000 is a lot of fun - I've done a few test cuts with a 10mm (3/8") endmill, 1mm deep (0.04") at 1100mm/min (44IPM) (not on an X3 BTW) and it was like the preverbial hot knife through butter. Well, except that butter doesn't weld itself to the knife - I really need to get flood coolant going again!