Hi Bodger,
I'm passing on the email and photos my friend sent me today. He's feeling and learning as he goes and has had a couple false starts as he tries to figure the best sequence to pull things appart so any tips from you would be great and will no doubt save him time..
I didn't take a photo and wasn't able to fully examine the latest stage (Top cover off) as I had to leave in a hurry when they shut the factory.
The top cover with bearing and the balancing sleeve with SIZAG encoder are now removed.
Inside you see the spindle / motor shaft (no photo yet).
I don't think there is another nut on the top end.
You can see a gap to the left of the spindle flange on Front1.jpg.
Hope our friend <on cnczone> finds something familiar.....on these photos. |