[_taz_]

Seems like people like HF. I do, don't get me wrong, I know a lot of their stuff needs tweaking or whatever to be good, but for what you pay you can usually make it work. You just have to use your own judgement if the tool will do the job you want it to do.

Anyway, don't want to open a can of worms, if you don't like HF stop reading.

I see people talking about the 15% coupon. This is an FYI there is also a HF Inside Track Members club. It only cost $10/yr to join but if you buy much it's worth it. For instance right now the geared mill 42827 is $1199 but for ITC members its $899. There are no flyers or sale notices, you just have to log in and see whats on sale. I got my 44991 for $418 out the door. If you see something you want look it up, it might be on ITC sale. Sometimes even the stuff on sale has a bigger ITC discount.
You print out the web page and take it with you, most mgrs will also let you use your coupon in conjunction with it.

Look up item 42800 online. I bought 1 tool and got my $10 back.
If you are curios and have an item in mind tell me the number I'lll look it up on ITC. I tell you if you go to HF for anything it's worth your $10