X3 Mill just runs by it self | |
The other day I was milling some steel and I popped a fuse on my X3 mill. I got my new fuse today and as soon as I turned on the main power the mill started running a full speed. I hit the EM stop and it just kept on running. The speed control seems to have no effect on the mill and neither does the EM stop. The amber abnormal light is on constantly.
I opened up the electronics housing and inspected for any signs of burns or loose wires and observed nothing. Any one have any suggestions?
UPDATE: 8/25/04 Lathemaster sent me out a new speed control board and it fixed the problem. Once again lathemaster comes through!
Last edited by replicapro; 08-25-2004 at 01:01 PM.
|