Originally Posted by BigDaddyG ... assuming your not pulling my leg!
Glen |
No Glenn - really serious here - sometimes I kid a bit but not now
SO,I've seen reference on the site to using multi-start threaded rod to increase the
speed/IPM on a machine. That is why I asked the ?'s regarding how that works -- well -
now I get an AH HAAA -
of course - you can use a 10 TPI threaded rod - get twice the speed of a 20 TPI and if the 10 TPI is multi-start, you also get
better resolution - ie tighter tolerances! OK if I got that right Thanks - else give me another heading change.
Thanks Man! Jim
And OH yeah - better usually cost a bit more
