Originally Posted by squale  These parts are made from plastic, usually HDPE and the overall dimensions are about 3" long by about 2.5" diameter.
Here is a pic..
 |
This is most likely the cheapest. $83,995.00 for the Lathe and $24,095.00 for the Live Tooling Option. http://www.haascnc.com/hasslefree_qu...-15#hasslefree
__________________
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com |