Yes it is me again.
I was setting up my lathe Thursday to CNC, ended up using the Mill PC to run the Lathe, and I smoked my Xylotex board! I was not thrilled at all. I thought I had the wiring the same as I have on my mill, guess not!
So, is there anyway to test the wiring or the steper motors to make sure you have the right A/A+ BB+ combinations?
I have one SLO-SYN 250 stepper and a few of the POwermax II steppers, and I really want to make sure I have all connections right before I let the smoke out again.
Any ideas?
Thanks
Smitty |