HI guys I am a total newbie and lost . I have a sheeline 5410 with Xylotex 3 axi driver and powerex 2 motor with 116 oz torque/
The setup seems to work out preety well . X Y Z all goes in to right direction
but. the problem is
when my mill move 230mm the DRO in the screen show 237.568 mm which is not right . I played around with the motor tuning but could not do a thing
so please help me out
ANy help will be greatly appriciated.
thanks again
note:: and sorry if I am not suppose to post here. I dont know how to start a new thread// ..